Detailer V2 (Feynlab)

 

Detailer – A super hydrophobic, durable, slick, glossy, spray-on and wipe-off maintenance spray, drying aid, and sealant. Protects coatings from water spotting during the curing process.

Catégorie : Étiquette :
Feynlab

Description

Detailer V2 (Feynlab)

FEYNLAB® DETAILER is more than a 21st century ‘quick detailing spray.’ Utilizing FEYNLAB’s® true nano technology, DETAILER contains water-based polymeric cleaning agents which clings to light layers of dust and contaminants, removing them thoroughly. DETAILER adds a durable layer of significant hydrophobic & ‘self cleaning’ properties and additional gloss to vehicle exterior surfaces.

DETAILER is an ideal product to protect ALL coatings on the market from water spotting during the curing process.

Product Benefits

  • A durable ‘spray sealant’ which doubles as a traditional quick detailing product.
  • Use as stand-alone protection or to top ceramic coated vehicles.
  • An Excellent spot cleaner or drying aid after washing vehicle surfaces.
  • Safe for all vehicle exterior surfaces: paint, plastic, vinyl, rubber, etc.
  • Completely water based, Detailer is completely Body Shop safe – silicone free.
  • Perfect final step product to protect all coatings from water spotting during curing.

Durability & Application Surfaces
Durability – 3 months.

APPROVED SURFACES FOR APPLICATION ONLY: – DO NOT apply to unapproved surfaces

  • Clear-coated painted surfaces (see warranty terms and conditions for approved manufacturers & vehicle types
  • Black textured plastics
  • Headlights & Tail-lights
  • Black piano trim
  • Clear-coated painted wheel rims & calipers

Included
500ml Bottle.

Où acheter ?

Revendeurs, faites vous connaitre.

Guide utilisation

Directions

  • Place vehicle in a well lit, cool, & contamination free environment.
  • Thoroughly rinse vehicle of all loose dust, debris, and topical contamination.
  • Clean exterior surfaces using PURE WASH for traditional wash, or PURE RINSELESS for waterless or rinseless wash methods.

Application Instructions

  1. Thoroughly shake the bottle before use.
  2. Using a clean microfiber towel, apply DETAILER to the towel. Initially Prime a new towel with 3-5 sprays.
  3. For each section, the size of half a door or a quarter of a hood, apply 1-2 additional sprays to the towel.
  4. Spread evenly over the surface. Amount of product should be enough to evenly coat the area without over saturation.
  5. After applying, immediately, buff the area clear with another clean microfiber towel.

* * Use as maintenance topper or drying aid: Wash surfaces thoroughly, remove the majority of water, and then apply.

Recommended Maximum Area of Application:

HALF of a door or 1/4 of a hood, then wipe off in same pattern as application.

Final Inspection

Carefully inspect all finished panels for leftover residue during the final wipe. Commonly edges, emblems, and other tight areas may contain some remaining residue.